Wednesday, June 6, 2012

J8700A


Ports
96 autosensing 10/100/1000 ports(IEEE 802.3 Kind 10BASE-T, IEEE 802.3u Kind 100BASE-TX, IEEE 802.3ab Kind 1000BASE-T), Press Type: Auto-MDIX, Duplex: 10BASE-T/100BASE-TX: 50 percent or full; 1000BASE-T: complete only; 8 start component slots; Can handle a highest possible of 32 10-GbE spots or 288 autosensing 10/100/1000 spots or 192 mini-GBICs, or a combination
Mounting
Mounts in an EIA-standard 19 in. telco tray or devices cupboard (hardware included); horizontally exterior increasing only
Memory and processor
Gigabit Module : ARM9 @ 200 MHz, bundle barrier size: 144 Mb QDR SDRAM; 10G Module : ARM9 @ 200 MHz, bundle barrier size: 36 Mb QDR SDRAM; Control Module : Freescale PowerPC 8540 @ 666 MHz, 4 MB display Mb, 128 MB lightweight display, 256 MB DDR SDRAM
Latency
AJ716A
1000 Mb Latency: < 3.7 µs (FIFO 64-byte packets); 10 Gbps Latency: < 2.1 µs (FIFO 64-byte packets)
Throughput
up to 564.2 thousand pps
Routing/switching capacity
758.4 Gbps
Switch material speed


758.4 Gbps
Routing desk size
10000 entries
Management features
HP PCM+; HP PCM (included); command-line interface; Web browser; settings menu; out-of-band management (serial RS-232C)
Power and managing requirements
Power consumption
299 W (standby)
Input voltage
100-127/200-240 VAC
Input frequency
50/60 Hz
J8700A
Safety
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Electromagnetic compatibility
FCC Category A; VCCI Category A; EN 55022/CISPR 22 Category A
Operating warm range range
0 to 55°C
Operating moisture range
15 to 95% @ 131°F (55°C) (noncondensing)
Operating altitude
up to 3 km
Power provide name
2 x J8712A
Acoustic stress emissions
Power: 64 dB, Pressure: 57.5 dB, ISO 7779, ISO 9296
Heat dissipation
4900 BTU/hr (5169 kJ/hr)
Immunity standard
EN 55024, CISPR 24; IEC 61000-4-2; 4 kV CD, 8 kV AD; IEC 61000-4-3; 3 V/m; IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line); IEC 61000-4-5; 1 kV/2 kV AC; IEC 61000-4-6; 3 V; IEC 61000-4-8; 1 A/m, 50 or 60 Hz; IEC 61000-4-11; >95% decrease, 0.5 period; 30% decrease, 25 periods; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3

No comments:

Post a Comment